Vimeo Live로 동영상을 라이브 스트리밍하려면 인코딩 소프트웨어를 다운로드해야 합니다. Vimeo 파트너사의 다음 인코딩 소프트웨어를 권장합니다:
- Livestream Studio
- Open Broadcaster Software
- Teradek VidiU
- NewTek Tricaster
- Epiphan Pearl, Pearl 2
- Livestream Broadcaster Pro
모든 인코더의 설정은 다음과 같이 하세요:
- 코덱 H.264
- 아웃풋 해상도 1920 x 1080 (최대)
- 프레임 레이트 60 fps (최대)
- 키프레임 간격 2초
✦ Livestream Studio
Two (2) licenses to Livestream Studio are included with your Vimeo Premium membership, meaning you can download it onto two separate computers and use the same Vimeo login. One thing to note is that you will need an internet connection to authenticate Studio, but if you lose connection, you can continue using it for up to 24 hours before you will be prompted to reconnect and log in again.
To download Studio, create and configure an event on your Vimeo account. Select the Connect (RTMP) tab before going live; a download link to Livestream Studio is available there.
To stream to Vimeo using Livestream Studio, navigate to the Stream tab. If you logged into your Vimeo account when you first launched Studio, Vimeo should be the active destination by default. If not, select Vimeo as your streaming provider. This will open a browser window to Vimeo and verify your account (you will be prompted to log into your Vimeo account in the browser if you are not already). You will then be able to create a new stream (or select a scheduled event), adjust your privacy settings, and go live.
For more detailed step-by-step instructions on how to stream to Vimeo Live using Livestream Studio, please check out our guide in the Livestream Help Center.
Before you start streaming on Vimeo, you need to configure your input source in Wirecast. Once you've setup your input source in Wirecast and created a live event on Vimeo, click Output in the top navigation of Wirecast and select Output settings.
If you have Wirecast version 8.1, you can select Vimeo from the destination drop-down menu. From here, you can log in to your Vimeo account by clicking Authenticate, then select which stream you’d like to connect to. Make sure to select a maximum profile of 1080p60 (4Mbps) x264 H.264 for the highest stream quality.
If you’re using an older version of Wirecast, you’ll need to select RTMP Server from the list instead. From the broadcast view on Vimeo, copy the RTMP URL and paste it into the Address field in Wirecast, and copy the Stream Key from the broadcast view of Vimeo and paste it into the Stream field in Wirecast.
이벤트를 시작할 준비가 완료되면 Wirecast에서 스트림 버튼을 클릭합니다. 몇 초 후 Vimeo에서 스트림이 표시됩니다. Wirecast 미리보기를 이용하여 라이브 스트리밍 도중 여러 인풋 소스로 전환할 수 있습니다.
To stream to Vimeo Live using SlingStudio, you must first log in to SlingStudio and start a new live project, before selecting Vimeo from the destinations menu. This will prompt you to log into Vimeo and authorize the SlingStudio app within your connected apps on Vimeo.
Once logged in, you can select from any of your scheduled live events, or create a new live event from within the Vimeo menu. Creating a new live event will allow you the options to add a title, description, and privacy setting, as well as schedule the planned start time/date.
Please note: even if you schedule a start time for your event, you’ll still be required to send the stream manually in order to begin at the selected time.
Now that your event has been created, you can access this event’s URL using the Copy URL button, and configure the Simulcast Settings if you wish to also send your stream to other social destinations using Vimeo’s simulcast feature. The Simulcast Settings button will direct you to the live settings page for your event on Vimeo, where you can adjust your simulcast destinations using the “Destinations” tab or grab the player's embed code to embed the live event on your site, along with our built-in audience chat to interact with your audience during the live event. For more information, please check out our Simulcast Guide.
Once all your settings are configured, go ahead and click Start on the Vimeo destination to go live from SlingStudio. The timecode indicator on the bottom of the Program view will show the current duration of your live event on Vimeo.
✦ Open Broadcaster Software (OBS)
Before you start streaming on Vimeo, you need to configure your input source in OBS (e.g. camera). To set up an input source, look for the Sources section, then click the + sign to add whatever type of input you like from this list, then make sure you have it selected and click the up arrow until it is first on the list. You should now see your camera's input in the stream preview section of OBS.
Vimeo에서 라이브 이벤트를 생성한 후 OBS 창의 오른쪽 하단에 위치한 설정을 클릭합니다. 왼쪽 패널에서 스트림 을 선택하고 스트림 유형 아래의 드롭다운 메뉴에서 커스텀 스트리밍 서버를 선택합니다. Vimeo의 방송 뷰에서 RTMP URL을 복사하고 OBS의 URL 입력 창에 붙여넣습니다. 다음은 Vimeo의 방송 뷰에서 스트림키를 복사하여 OBS의 스트림키 입력 창에 입력합니다.
이 작업을 완료한 후 OK를 클릭하여 OBS의 메인 창으로 돌아갑니다. 라이브 이벤트를 시작할 준비가 되면 OBS의 오른쪽 하단에 위치한 스트리밍 시작 버튼을 클릭합니다. 몇 초 후 Vimeo의 방송 뷰에 스트림이 표시됩니다.
✦ Teradek Encoder Line
Teradek has integrated Vimeo Live as a stream destination in their VidiU, VidiU Pro, and Live:Air Action app. First, make sure your inputs are configured and the app is showing the feed correctly from all connected cameras. You can find more in depth information on how to set up your Teradek VidiU Pro here, and your Live:Air Action here. Once your VidiU, VidiU Pro, or iPad with Live:Air Action is connected to a network and properly configured, then you can add Vimeo as your broadcast destination.
Simply go to Settings, select Broadcast Destination, and then scroll down and select Vimeo from the list. You’ll be prompted to enter your Vimeo login information, and once you’ve done that, you’ll be able to create your Live Event, adjust your settings, transitions, and text overlays, and finally go live.
✦ NewTek Tricaster
In order to stream on Vimeo using a NewTek Tricaster, you must use the manual RTMP configuration. With a broadcast system this advanced, you likely have multiple input sources that you'll want to make sure are all working and properly configured. Once all input sources are set up in the broadcast switcher, you can create your live event on Vimeo.
다음 단계는 Tricaster에서 스트림 설정을 선택하는 것입니다. 첫째, Tricaster에서 스트림 버튼 근처에 있는 기어 모양 아이콘을 클릭하여 라이브 스트리밍 설정 전체 옵션을 표시합니다. 해당 창에서 Adobe Flash Encoder를 선택합니다. Vimeo의 방송 뷰에서 RTMP URL을 복사하여 Tricaster의 위치 창에 붙여넣고 Vimeo의 방송 뷰에서 스트림키를 복사하여 Tricaster의 스트림 창에 붙여넣습니다.
이벤트를 시작할 준비가 완료되면 스트림 버튼을 클릭합니다. 몇 초 후 Vimeo에서 스트림이 나타납니다.
✦ Epiphan Pearl and Pearl 2
In order to stream to Vimeo using the Pearl (or Pearl 2), you’ll need to first set up your input configuration. Connect to the admin interface of your Pearl using your preferred connection mechanism, then create a channel and custom layouts that showcase your live production. Double check your resolution, bitrate and video/audio encoding settings.
After you've created a live event on Vimeo and previewed your live program on Pearl's touch screen, click Streaming for the channel you want to stream in the Pearl admin interface, and scroll down to the Stream to server section. Select RTMP push from the dropdown menu, and copy the RTMP URL from the broadcast view on Vimeo and paste it into the URL field in Pearl. Then copy the Stream Key from the broadcast view of Vimeo and paste it into the Stream name field in Pearl. You can leave the username and password fields blank, then click Apply.
이벤트를 시작할 준비가 완료되면 Pearl에서 시작을 클릭합니다. 몇 초 후 Vimeo에서 스트림이 나타납니다.
✦ Livestream Broadcaster Pro
If you own a Livestream Broadcaster Pro, you can stream to Vimeo via a workaround. The Broadcaster Pro can only stream to the Livestream platform directly, but you can connect the Broadcaster Pro to Livestream Studio, which is included with a Vimeo Premium membership, and then use Studio to go live to Vimeo.
First, download Livestream Studio onto your computer (as described above) and launch the software. Log into your Vimeo account when prompted.
Power on your Broadcaster Pro and connect it to the same network that the computer running Studio is connected; this will allow Studio and the Broadcaster Pro to communicate with each other. Once it's connected, push in the black joystick to enter the menu and select Stream Mode, then select Studio.
In Studio, navigate to the Inputs tab in the lower left quadrant of the interface. Select Add Input > Remote, then choose your Broadcaster. It will then be available as a source in Livestream Studio and you will see it in the multi-view. Right-click the image in the multi-view to put your Broadcaster into the Program Output.
Now select the Stream tab in the lower right corner. Log into Vimeo if you are not already, and select your event (you can also create a new one). Give your stream a title, choose your streaming quality, then you can click Go Live to start your stream.